I have several real servers with http (80) and https(443) that I need to load balance. I also need to get the remoteip of the client. servers work if I acceess them directly (without load balancer)
I tried creating one VS with 80 and extra port 443 as well as separate VS for each port. If it is in non-transparent mode they all work fine but they are showing the Load balancer IP for the source so this is not an option.
Following the instructions for transparent implementation I changed the default GW of the real servers to the Load balancer IP ( i have a one arm configuration) and I tried in transparent mode both L4 and L7 but none of them works. SSL certificate is on the Real Servers. I have 5.1-44 firmware on LB2000.
Please advise if I am missing something.
